8:34 am - Tuesday - November 17th - TWW - 48° F, humidity 67%, cloud cover 49% (looks like 100% to me), wind 20 mph out of the southwest.....heavy cloud cover right now with rain, and a forecast high of 49° F. On this date in 2015 TLE and I were just north of Ventura, CA.....
....dry camping along Rincon Parkway watching sunset #5. I generally like to post pictures from different places each day, which we've visited over the years, but when this time of year arrives I feel compelled to post pictures from the last time we visited Rincon Parkway every day. It is such a magical place in our hearts. The view this morning.....
....just stopped raining a few minutes ago. Rained all night.
We knew rain was coming Monday night/Tuesday morning so we wanted to be sure to get at least one of the 330 watt solar panels mounted on the roof of the trailer before the rain came. It was just a matter of hoisting the heavy, awkward panel to the roof top. We discussed several options, but the one that made the most sense was to do it from the front of the trailer. I have a tool box on the tongue of the trailer, and the top of the tool box is about 3' off the ground. We lifted the panel in the portrait orientation and rested one end on top of the tool box, then leaned the panel against the front the trailer. With each of us standing on a ladder, we then were able to lift the panel, and shove it up and over the top of the roof. Frankly, I did not think it would be as easy as it was......
.....the 'feet' of the rear arms of the solar mounting hardware are bolted to the frame of the trailer, whereas the front feet are affixed to the roof with heavy duty two sided tape, then covered with DICOR self leveling sealant, just like the panels of the roof of the Newell. I did not want to drill holes through the roof. On a scale of 1-10, 10 being extremely hard and difficult, and 1 being easy to get that panel on the roof, and mount it, we both figured it would be a '10', but it turned out to be a '1'. I'm glad we were wrong.
Once the panel was in place I proceeded to drill the holes through the thick aluminum pieces that line the edge of the roof, then used 3" self sealing, roof screws to screw down both rear 'feet'. On the front feet I used heavy duty, two sided tape to affix the 'feet' to the roof, then DICOR self leveling sealant to cover the 'feet', and to hold them to the roof. This is how the four panels on the Newell roof are affixed, and it has worked well for 15 years.
Once we were done it was just a matter of cleaning up after ourselves, and putting away the tools and ladders. I fully expected this job to take a several hours, at best, but it took less than an hour beginning to end.....amazing. I spent some time in the greenhouse reprogramming our diesel heater so it will run for 4 hours on nights when the temps get down to, or below freezing. We have ordered three black, 55 gallon barrels to fill with water, and keep in the greenhouse. The theory is that the sun will heat the water in the barrels during the day, then the barrels will release that heat over the course of the night to keep things above freezing, and remove the need for the diesel heater. I will be reporting on that experiment in the near future.
In spite of the cloudiness we had Monday, portending the rain forecast for Tuesday, our batteries still achieved a full charge by early afternoon, including the house, which got back to 100% before noon time.
Thanks for stopping by!











No comments:
Post a Comment